杭州市清泰水厂膜处理自控系统方案比选

结合杭州市清泰水厂净水技术改造工程,介绍了膜处理自控系统的特点和要求,就三个膜处理自控系统方案进行了分析和总结。通过对比,选用了方案三,该方案实现了每一膜组的冗余热备控制,较好地达到了设计要求,可靠性高。     

轴流转桨机组水力过渡过程中的轴向水推力研究

轴流转桨式机组水力过渡过程中出现的抬机现象会直接危及电站的安全稳定运行。本文通过对轴流转桨式水轮机轮叶的受力分析,根据瞬态旋转水力矩推导出轴向水推力计算模型,并将计算模型应用于草街水电站的过渡过程计算中,研究了防抬机的工程措施。     

宽带钢厚度模型的研究与优化

介绍莱钢宽带钢厚度模型的优化,以改善板形,提高控制精度.     

Ranking Approach for the User Story Prioritization Methods

The AHP （analytic hierarchy process） has been applied in many fields and especially to complex engineering problems and applications. AHP is capable of structuring decision problems and finding mathematically determined judgments built on knowledge and experience. This suggests that AHP should prove useful in agile software development, where complex decisions occur routinely. This paper describes a ranking approach to help stakeholders select the best prioritization method for prioritizing the user stories.     

Adaptive Decentralized NN Control of Nonlinear Interconnected Time‐Delay Systems with Input Saturation

In this paper, a novel decentralized adaptive neural control scheme is proposed for a class of interconnected large‐scale uncertain nonlinear time‐delay systems with input saturation. Radial basis function (RBF) neural networks (NNs) are used to tackle unknown nonlinear functions. Then, the decentralized adaptive NN tracking controller is constructed by combining Lyapunov–Krasovskii functions and the dynamic surface control (DSC) technique, along with the minimal‐learning‐parameters (MLP) algorithm. The stability analysis subject to the effect of input saturation constraints are conducted with the help of an auxiliary design system based on the Lyapunov–Krasovskii method. The proposed controller guarantees uniform ultimate boundedness (UUB) of all of the signals in the closed‐loop large‐scale system, while the tracking errors converge to a small neighborhood around the origin. An advantage of the proposed control scheme lies in the number of adaptive parameters of the whole system being reduced to one and in the solution of the three problems of “computational explosion,” “dimension curse,” and “controller singularity”. Finally, simulation results along with comparisons are presented to demonstrate the advantages, effectiveness, and performance of the proposed scheme.     

江山市峡口水库发电输水隧洞进水口闸门竖井开挖爆破安全控制及评价

峡口水库发电输水隧洞进水口位置靠近坝体、厂房等建筑物,且周边岩体较为破碎.通过现场爆破振动试验制定了合理的爆破方案,并在爆破过程中实行爆破振动监测,按照监测结果及时调整爆破施工方案,达到对邻近建筑物进行保护的目的.     

明渠弯道边界层的Markov特性研究

针对明渠弯道湍流边界层,利用一阶Markov过程并结合象限分析法,计算了转化模式的转化概率。结果指出各象限平均自转化概率为65.51%,76.98%,69.42%,76.97%,湍流猝发的喷射和清扫发生频率最高;自转化概率P22、P44沿河宽周期性向凸岸衰减,并在弯顶凹岸处达到最大值,其随着底部环流的增大有微弱减小,但...     

天津市于桥水库饮用水源地保护对策研究

于桥水库作为天津市最重要的饮用水水源地,其库区水体氮、磷浓度接近国家标准阈值,亟需采取保护防治措施缓解水体氮、磷污染负荷压力。本文基于水库型饮用水水源地环境保护技术框架的一般思路,开展了对于桥水库水环境治理技术方案的分析研究。首先,使用GWLF(普适流域负荷函数)模型对水库周边流域污染源负荷进行识别与负荷解析;之后,基于最佳管理实践(BMP)和低影响开发(LID)的理念和方法,同时根据于桥水库的具体实际情况,提出相应的工程治理措施,并采用BATHTUB模型对各工程措施进行环境效益评估计算;最后使用模糊层次分析法(FAHP)对各工程措施进行择优分析,得出最佳治理实施方案。     

基于免疫粒子群算法的参数估计方法

针对污水生化反应模型参数估计问题,提出一种基于免疫粒子群算法的估计方法。该方法采用免疫算法保持粒子群的多样性,避免粒子群算法的过早收敛而降低寻优能力。利用估计的参数值对实验数据进行拟合,仿真结果表明,拟合误差率低于标准的粒子群和遗传算法,进一步提高了污水生化反应模型参数估计精度。     

软件可靠性模型研究进展

软件可靠性模型旨在根据软件失效数据,通过建模给出软件的可靠性估计值或预测值.它不仅是软件可靠性预计、分配、分析与评价的最强有力的工具,而且为改善软件质量提供了指南.对近年来提出的多种不同的软件可靠性模型进行分类剖析,讨论了部分模型的预测能力和适用性,分析了多个模型适用性差的原因,还对未来的研究趋势进行了展望.